Keeping Your Bathroom Warm Without Blinding Your Kids
When we design infrared heaters for bathrooms, we’re basically trying to solve a tug-of-war. You want that instant, cozy heat—especially in a damp room—but you don’t want a light so bright it feels like you’re staring into the sun. If you’re putting one of these in a nursery or a shared family bathroom, the kind of light it puts out matters just as much as how hot it gets. Saving your eyes Standard shortwave lamps are bright. Like, really bright. That harsh glare is a nightmare for sensitive eyes. To stop that, we put a special coating on the quartz glass. Think of it as a filter. It blocks the blinding white light and those nasty UV rays, but lets the actual warmth slide right through. Instead of a spotlight, you get a soft, warm glow. It’s still plenty hot, but it won’t hurt a child’s eyes. Dealing with the steam Bathrooms are a nightmare for electronics. The moisture just eats everything. That’s why we build these to IP44 standards. In plain English? It means the housing can handle splashes from any direction and keeps out bits of dust. We seal the wiring and use heavy-duty gaskets to keep steam away from the internals. Without that, you’re just waiting for the contacts to corrode and the whole thing to short out. The honest trade-off Now, here’s the catch. Adding that protective coating to the glass means a little bit of the heat gets blocked too. You lose maybe 5-10% of the raw thermal power compared to a clear tube. But we’ve got a fix for that. We just bump up the filament wattage so you still feel that “instant heat” the second you flip the switch. Just a heads-up: if you’re installing several of these at once, make sure your circuit breaker can handle the peak load.